An Autumn Morris Blazer

Have you ever found the perfect fabric and had it just scream what to make with it?

Grainline Studio’s Morris Blazer has been on my “Make List” since its release earlier this year. On a recent fabric buying trip, I found an incredible wool knit that I instantly pictured as the most stunning Morris Blazer. A flash of inspiration, no questions asked. It was a no brainer to not only buy the fabric for the store, but also get to work on this “dream project.” (To learn more about the fabric at the bottom of this post)

I didn’t want to just cut into this precious houndstooth wool knit for a pattern that I had never made. I decided to make another version of the Morris Blazer using a grey knit from my stash to check the fit, length etc. Get all the bugs out before I cut into the “good” stuff!

I made this first version as given in the pattern, size 8. It fit perfectly, but was far too short for the cozy wool blazer I had envisioned for my fall/winter wardrobe. Based on the fit of my test Morris, I decided to lengthen the body by 3 inches and the sleeves by 6 inches. I used the handy lines that Jen included on each pattern piece making the lengthening process so simple. The sleeve did prove a bit more challenging- I had to do a bit of tapering, nothing too difficult.

Lengthening the Morris Pattern Pieces

Lengthening the Morris Pattern Pieces

Now it was time to cut! I got my pieces laid out just how I wanted them. My goal was to have the finished result be about half solid grey, half houndstooth. In laying out the pieces I noticed that those lengthening lines I drew on the pieces proved very helpful in matching up the pattern. On all of the body pieces and front facing, the “lines” were in the exact same place. I just had to line them up along the straight lines in the pattern. So helpful! The line on the sleeves was bit offset from the rest, so I did a bit of adjusting so that all of the pattern would line up across the blazer.

Laying Out the Morris Pieces- Ready to Cut

Laying Out the Morris Pieces- Ready to Cut

I had a slight heart attack before I made that first cut, but then I was all in! As I cut each piece I draped them over my dress for just to make sure it was all going according to plan. Once everything was cut out I couldn’t wait to get sewing! Since I had just made my test Morris, the second one went together really quickly. The unique wool knit that I used also made it so I didn’t have to finish my seams. I pressed all of the body seams open to help everything lay nice and flat and I did serge the arm holes- it seemed to really help finish them off. Other than that, everything went together just as described in the pattern. I love that Jen has such great tutorials on her website– I looked at it both times when attaching the facing to make sure I got it right.

Now for the RESULTS!

Finished Wool Morris Blazer

Finished Wool Morris Blazer

I am absolutely in love with how this Morris Blazer turned out. It is just how I had envisioned it and it seems like this fabric was made for this pattern. I am quite proud of my pattern matching- that is something that I still am working on and I always doubt whether I am doing it right. I also found the perfect necklace in my closet so that makes everything even better!

Finished Morris Blazer- View from the Back

Finished Morris Blazer- View from the Back- Check out that Center Back Seam!

The Morris Blazer pattern is another home run from Grainline Studio– I know everything is going to fit perfectly and there is always so much potential for fabric choices and reinterpretations. I think her Linden Sweatshirt and the new Tamarack Jacket will soon be hitting the cutting table!

About the Fabric

This houndstooth ombre wool knit is unlike anything I have seen. It is light weight and definitely a knit- you can see the stockinette stitch from the back side. It has also been felted, giving it a super soft almost fuzzy hand. Such an incredible piece and a dream to work with! Available now in the shop HERE.

7 comments

Leave a Reply to Michelle Cancel reply

Your email address will not be published. Required fields are marked *